Controller for LEDs with dimming line

Fast Installation, Simple Wiring

The output is double-clamped: 2× V+, 2× GND, 2× Control Line. Two LED strings can be connected directly to the controller without a distributor or additional terminal block. For frame LEDs that are positioned at the top and bottom of the box, a single controller is sufficient – this saves significant installation time per box.

Both outputs always dim together; separate control is not possible.

One Controller for All Three Signal Types

Depending on the LED type, the dimming line requires a different voltage range. The controller can be switched between 0–3V, 0–5V, and 0–10V at the push of a button; the status LED indicates the active mode (red = 0–3V, green = 0–5V, blue = 0–10V). This eliminates the need to clarify in advance when ordering and only one controller type needs to be kept in stock.

12V and 24V with the Same Device

The input voltage ranges from DC 5V to 24V – one product for both voltage levels. Load capacity up to 12 A; for larger installations, please distribute across multiple controllers.

Smart Home and Remote Control

The controller can be controlled via WiFi in the Tuya App or integrated into Amazon Alexa and Google Home, including voice control and scheduling. Where no network is available, control is possible via a 2.4G radio remote control with a range of up to 30 m.

⚠️ Not for PWM-Dimmed LEDs

This controller generates an analog control signal on a separate dimming line and is suitable exclusively for LED modules with a dimming line.

Not compatible with LEDs that are dimmed via PWM on the supply line. Please check the datasheet to confirm that the module has a separate dimming line with voltage signal (0–3V, 0–5V, or 0–10V).